Pages: [1]
Author Topic: Me7 logger - Item that can be logged  (Read 4396 times)
Bugman100
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 22


« on: August 02, 2019, 02:34:06 AM »

I am trying to work out why Requested load is higher than LDRXN.

As part of this I would like to log data from the calculation Rlsol to Plsol. But there are item that cant be logged in ME7 logger so working out what is effecting the outcome calculation for Plsol is impossible.

Q. Can these items be added into Me7 logger and if so how?

Thanks

Nigel
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: August 02, 2019, 03:22:07 AM »

https://s4wiki.com/wiki/Tuning#IAT_effect_on_specified_load_and_requested_boost

You have to use a disassembler to find RAM locations.

for 2.7t mbox, examples are the torque_ and extra_ files: http://files.s4wiki.com/ME7L-ecu/
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #2 on: September 28, 2019, 11:19:20 AM »


Q. Can these items be added into Me7 logger and if so how?


You can. You just need to change(or add) offset, name, factor, mask in .ecu file.

;Name           , {Alias}                           , Address, Size, Bitmask, {Unit},    S, I,            A,      B, Comment
afnmn           , {}                                , 0x383301,  1,  0x0000, {rpm}     , 0, 0,           40,      0, {Bereichsfenster Aussetzer, minimale Drehzahl}
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)