NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > [SIMOS18] Leon Cupra R 300hp throttle not working after remap
Pages: [1]
« previous next »
Author Topic: [SIMOS18] Leon Cupra R 300hp throttle not working after remap  (Read 5056 times)
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« on: November 09, 2019, 12:07:31 PM »
Hello, i facing this problem after flashed a remap to a Seat Leon Cupra R 300hp.

Starting the car, pedal doesn't work, remain in idle with engine on and if you press it... rpm don't raise.

Anyone of you can suggest why?

Regards
Logged
Ron28
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8
« Reply #1 on: November 09, 2019, 01:07:28 PM »
Did you rise all the single tl?
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179
« Reply #2 on: November 09, 2019, 04:45:18 PM »
What did you change?
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #3 on: November 10, 2019, 09:51:17 AM »
Flash it to stock and don't flash shit files?
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #4 on: November 10, 2019, 10:48:20 AM »
The charge control & DK control is telling you to fk off.. Something is wrong with that tune lol.
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #5 on: November 10, 2019, 12:10:31 PM »
Flash back to stock

One of the torque maps will be out causing the problem.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: November 11, 2019, 04:11:57 AM »
Quote from: Blazius on November 10, 2019, 10:48:20 AM
The charge control & DK control is telling you to fk off.. Something is wrong with that tune lol.

Thank you once again for your completely useless post. For what reason are you padding your postcount?
You probably have never even seen this ECU.
Read again the load of bollocks you wrote, which can be copy pasted under every single post in this forum asking for help. Oh it's the good old "CHARGE & DK Control".
jfc...

The actual exact reason is that indicated torque in one of the conversion maps is higher than the indicated torque limiter.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #7 on: November 11, 2019, 05:56:17 AM »
Quote from: prj on November 11, 2019, 04:11:57 AM

...
The actual exact reason is that indicated torque in one of the conversion maps is higher than the indicated torque limiter.

Ok thank you very much... i will check again these maps... maybe somethings is escaped  Undecided
« Last Edit: November 11, 2019, 08:02:52 AM by Khendal » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 02:24:54 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0s, 0q)