Pages: 1 2 [3]
Author Topic: Replacing MAF with MAP  (Read 13448 times)
seishuku
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 131


« Reply #30 on: November 24, 2019, 12:55:30 PM »

Run the MAF sensor in the cold pipe, we used to do that all the time on stock ECU Nissan setups. Usually produced more accurate airflow/intake temp readings too.

Down side is possible oil contamination on the hot wire in the MAFS, but that's not that bad.
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)