MED17 and clone tools

Pages: 1 2 [3]

« previous next »

Author

Topic: MED17 and clone tools (Read 29901 times)

RaraK

Hero Member

Karma: +58/-2
Offline

Offline

Posts: 539

	Re: MED17 and clone tools « Reply #30 on: February 18, 2015, 08:18:16 PM »

For what its supposed to support, the MPPS does ok.

Bootloader Tricore seems like some odd issues here and there though. Never bothered buying that plugin, wait for it to maybe get some updates done.


	Logged

de_Fre

Jr. Member

Karma: +7/-2
Offline

Offline

Posts: 25

	Re: MED17 and clone tools « Reply #31 on: March 06, 2015, 03:46:50 AM »

Had the odd issues with the MPPS OBD and Tricore boot module on MED17 VAG ecu's, but since a few software revisions ago, all seems to work well.


	Logged

alclot

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: MED17 and clone tools « Reply #32 on: September 22, 2017, 07:01:02 AM »

Hi mates! It´s a very interesting post. I have a question. If you have two units same bosch family but diferent reference are there programmer make 100% clone?
I have original ktag but it doent do that.
I hope you understand my poor english.

Thanks in advance Wink


	Logged

yxx499

Full Member

Karma: +4/-10
Offline

Offline

Posts: 106

	Re: MED17 and clone tools « Reply #33 on: September 25, 2017, 01:15:44 AM »

Wich is the question ?


	Logged

alclot

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: MED17 and clone tools « Reply #34 on: September 25, 2017, 01:28:00 AM »

The question is: is there any programmer that makes a clone 100% of two units?
I have the problem of OTP memory that after programming the unit, the car will not start.
I hope you understand the question.
Thanks in advance Wink


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6038

	Re: MED17 and clone tools « Reply #35 on: September 30, 2017, 04:41:01 AM »

Many tools can write OTP.
Of course you need to buy a new processor and solder it to the board for that.

Probably easier to just desolder the processor from the old ECU and solder it to the new one.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

alclot

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: MED17 and clone tools « Reply #36 on: October 02, 2017, 12:22:00 AM »

Hi mate! The problem when mcu is bga. It is nightmare for me ecus from vag. Others car brands aren't a problem about immo.
I hope in the future will easier.


	Logged

cherry

Sr. Member

Karma: +26/-2
Online

Online

Posts: 260

	Re: MED17 and clone tools « Reply #37 on: October 02, 2017, 12:21:36 PM »

For VAG you just need to recalculate eeprom for new OTP, no need to solder processor. Parts from eeprom are crypted with unique keys in OTP..


	Logged

alclot

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: MED17 and clone tools « Reply #38 on: October 04, 2017, 11:57:26 PM »

Hi cherry. How do you do that?
Thanks for reply Wink


	Logged

jamesr

Newbie

Karma: +1/-0
Offline

Offline

Posts: 15

	Re: MED17 and clone tools « Reply #39 on: January 27, 2020, 09:47:34 PM »

Hello fellow ECM affectionados lol Im in the middle of messing with this problem. Unfortunately Im still weak at this stuff. I read and saved a bin from a 2009 VW TDI. EDC 17 I believe. and the same from a replacement ECM. I used the Ktag. I purchased through a tuner as I am a Tune installer. My issue is the original ECM failed. I thought I would try to clone it. I got the replacement ECM to receive the file from the original ECM. It Has the vin &immobilizer # but the car still doesn't like the replacment ECM. I was hoping to extract the SKC and try to program the replacement ECM but I am not sure where in the bin it is. And how to convert it to the correct numbers. I have a lot to learn! Any info would help a lot thanks!!


	Logged

Pages: 1 2 [3]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 08:19:40 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search