NefMoto > Technical > Flashing and Chipping > ME7.5 Boot mode - No memories available
Pages: [1]
« previous next »
Author Topic: ME7.5 Boot mode - No memories available  (Read 4269 times)
Toxta
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: January 06, 2020, 04:48:28 PM »
Hi mates,

I received two ECU from same costumer, from "what i´ve been told" both died few days after flashing NLS/LC.

Not a big problem, i thought, but:

K-line - No communication
Boot mode - Only C167 detected, no memories available.

I suspect of damaged flash/eprom, but, even after changing them to new ones, i cannot get any communication.

Flash has vdd/vss/CE...etc...

I already tried different tools to boot, no success. (VF2 Flasher, Original MPPS, China Galletto, etc..)


Any clues?
Any advice?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: January 06, 2020, 05:01:15 PM »
Ditch NLS/NC until you find someone who can code it for you properly.

You could also disable RSA checking.

GL.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Toxta
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #2 on: January 07, 2020, 03:12:24 AM »
Quote from: nyet on January 06, 2020, 05:01:15 PM
Ditch NLS/NC until you find someone who can code it for you properly.

You could also disable RSA checking.

GL.

It´s not my job, costumer sent ecu´s to solve the problem, i didnt upload any file on it, just helping to solve. And because costumer said it was after fews days runing LC/NLS, i remembered this board Smiley
Logged
Toxta
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #3 on: January 07, 2020, 06:02:30 PM »
Anyone with some clue?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: January 07, 2020, 06:39:16 PM »
Quote from: Toxta on January 07, 2020, 06:02:30 PM
Anyone with some clue?


What are you asking? What sort of solution are you expecting?
You have 3 options:
1) remove NLS/LC
2) disable RSA
3) find somebody who knows how to implement NLS/LC w/o stomping on the RSA functions.

If bootmode isn't working the ECU is fried or your bootmode method is no good.

Does it work on other ECUs with the same PN?
« Last Edit: January 07, 2020, 06:42:01 PM by nyet » Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Toxta
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #5 on: January 08, 2020, 02:40:12 AM »
Quote from: nyet on January 07, 2020, 06:39:16 PM
What are you asking? What sort of solution are you expecting?
You have 3 options:
1) remove NLS/LC
2) disable RSA
3) find somebody who knows how to implement NLS/LC w/o stomping on the RSA functions.

If bootmode isn't working the ECU is fried or your bootmode method is no good.

Does it work on other ECUs with the same PN?

At the moment flash is original, i only need to get the ecu to communicate. I don´t need any LC.

ECU goes into boot, i can connect to processor, but i never have memories identified (neither flash or epp), that i already tested outside board.
Logged
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60
« Reply #6 on: February 06, 2020, 02:06:24 PM »
Quote from: Toxta on January 08, 2020, 02:40:12 AM
At the moment flash is original, i only need to get the ecu to communicate. I don´t need any LC.

ECU goes into boot, i can connect to processor, but i never have memories identified (neither flash or epp), that i already tested outside board.


the client does not finish something.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #7 on: February 06, 2020, 02:08:54 PM »
What p/n?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #8 on: February 06, 2020, 03:06:58 PM »
Can you read eeprom in boot mode?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 03:04:36 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)