NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > DTC off ME7.1.1 8E0909559e?
Pages: [1]
« previous next »
Author Topic: DTC off ME7.1.1 8E0909559e?  (Read 4600 times)
thatguyrockz
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 6
« on: February 25, 2020, 11:30:34 AM »
can someone remove these DTC's? currently broke NY resident. I know I need to fix my breather and vacuum hoses
And find whatever the hell is grounding and making these codes but for now I need to get my Inspection.



Code:
18010 - Power Supply Terminal 30: Voltage too Low
        P1602 - 002 - Lower Limit Exceeded - Intermittent
18032 - Shareware Version. To Decode all DTCs
        P1624 - 008 - Please Register/Activate
16684 - Shareware Version. To Decode all DTCs
        P0300 - 002 - Please Register/Activate
16685 - Cylinder 1 Misfire Detected
        P0301 - 008 - Implausible Signal
16688 - Shareware Version. To Decode all DTCs
        P0304 - 008 - Please Register/Activate
16687 - Shareware Version. To Decode all DTCs
        P0303 - 008 - Please Register/Activate
16502 - Engine Coolant Temp. Sensor (G62): Signal too High
        P0118 - 002 - Lower Limit Exceeded - Intermittent
16486 - Shareware Version. To Decode all DTCs
        P0102 - 002 - Please Register/Activate - Intermittent
16690 - Shareware Version. To Decode all DTCs
        P0306 - 008 - Please Register/Activate
16689 - Cylinder 5 Misfire Detected
        P0305 - 002 - Lower Limit Exceeded
Logged
_nameless
Hero Member
*****

Karma: +338/-465
Offline Offline

Posts: 2781
« Reply #1 on: February 25, 2020, 01:17:11 PM »
Quote from: thatguyrockz on February 25, 2020, 11:30:34 AM
can someone remove these DTC's? currently broke NY resident. I know I need to fix my breather and vacuum hoses
And find whatever the hell is grounding and making these codes but for now I need to get my Inspection.



Code:
18010 - Power Supply Terminal 30: Voltage too Low
        P1602 - 002 - Lower Limit Exceeded - Intermittent
18032 - Shareware Version. To Decode all DTCs
        P1624 - 008 - Please Register/Activate
16684 - Shareware Version. To Decode all DTCs
        P0300 - 002 - Please Register/Activate
16685 - Cylinder 1 Misfire Detected
        P0301 - 008 - Implausible Signal
16688 - Shareware Version. To Decode all DTCs
        P0304 - 008 - Please Register/Activate
16687 - Shareware Version. To Decode all DTCs
        P0303 - 008 - Please Register/Activate
16502 - Engine Coolant Temp. Sensor (G62): Signal too High
        P0118 - 002 - Lower Limit Exceeded - Intermittent
16486 - Shareware Version. To Decode all DTCs
        P0102 - 002 - Please Register/Activate - Intermittent
16690 - Shareware Version. To Decode all DTCs
        P0306 - 008 - Please Register/Activate
16689 - Cylinder 5 Misfire Detected
        P0305 - 002 - Lower Limit Exceeded


Lol too funny cant even get the paid version of vcds lite, car is full of codes and guys asking for free handouts. Good luck fella Cheesy
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
thatguyrockz
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 6
« Reply #2 on: February 25, 2020, 01:39:56 PM »
Using an OLD computer that doesn't have full version.. No need for full version right now. Im busy trying to learn WinOLS so I dont have to ask people of forums to do stuff for me.
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #3 on: February 25, 2020, 09:41:02 PM »
fyi. deleting dtc codes will not force your readiness. you have some reading to do
Logged
thatguyrockz
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 6
« Reply #4 on: February 26, 2020, 09:21:26 AM »
Im not trying to force readiness. Im trying to turn off the MIL. Readiness I can force with vagcom Im hoping. All the codes I have are really crap codes caused by a bad relay and a messed up breather but I haven't gotten paid yet (monthly). so far Ive been looking at 0x1C000 in winols as the start of the Error Code Class Table. But im stuck!
Logged
nyet
Administrator
Hero Member
*****

Karma: +605/-168
Offline Offline

Posts: 12242


WWW
« Reply #5 on: February 26, 2020, 10:30:11 AM »
Quote from: thatguyrockz on February 26, 2020, 09:21:26 AM
Im not trying to force readiness. Im trying to turn off the MIL. Readiness I can force with vagcom Im hoping. All the codes I have are really crap codes caused by a bad relay and a messed up breather but I haven't gotten paid yet (monthly). so far Ive been looking at 0x1C000 in winols as the start of the Error Code Class Table. But im stuck!

You're going to want to find alternate means of transportation.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
thatguyrockz
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 6
« Reply #6 on: March 04, 2020, 09:06:52 AM »
Quote from: nyet on February 26, 2020, 10:30:11 AM
You're going to want to find alternate means of transportation.

believe me I am!  Grin Grin
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • September 28, 2024, 09:53:21 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 4.649 seconds with 18 queries. (Pretty URLs adds 0s, 0q)