Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Data Logging
>
My first log
Pages: [
1
]
« previous
next »
Author
Topic: My first log (Read 5723 times)
s4man111
Jr. Member
Karma: +0/-3
Offline
Posts: 33
My first log
« on: December 19, 2020, 08:29:56 PM »
Can someone take a
Look at this . 2001 s4 b5 stage 3 . This is my first log using Me7. I’m getting p1129 overly rich code and boost cut down to 5-7 psi until I clear code and then I get normal boost.
Logged
s4man111
Jr. Member
Karma: +0/-3
Offline
Posts: 33
Re: My first log
« Reply #1 on: December 19, 2020, 08:34:38 PM »
This was a second gear pull each time
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: My first log
« Reply #2 on: December 19, 2020, 08:43:40 PM »
0 bytes.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: My first log
« Reply #3 on: December 19, 2020, 08:44:11 PM »
forget logs, if you are throwing codes fix your trims first.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
s4man111
Jr. Member
Karma: +0/-3
Offline
Posts: 33
Re: My first log
« Reply #4 on: December 19, 2020, 08:53:05 PM »
0 bytes?? I went through a lot of trouble to set this up ,did it not log again
?
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: My first log
« Reply #5 on: December 19, 2020, 08:58:03 PM »
have the decency to check that they have useful information first, preferably with ecuxplot.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
s4man111
Jr. Member
Karma: +0/-3
Offline
Posts: 33
Re: My first log
« Reply #6 on: December 19, 2020, 09:07:54 PM »
Quote from: nyet on December 19, 2020, 08:58:03 PM
have the decency to check that they have useful information first, preferably with ecuxplot.
I don't understand I started up visual
Logger and loaded Ecu file and loaded up config file and hit log! Com port was correct too
Logged
s4man111
Jr. Member
Karma: +0/-3
Offline
Posts: 33
Re: My first log
« Reply #7 on: December 20, 2020, 12:45:24 AM »
Quote from: nyet on December 19, 2020, 08:43:40 PM
0 bytes.
OK so I figured out what I did wrong I was using a program called visual Me7 I don't know where the hell that came from but I wasn't using the regular Me seven logger!!!
Logged
nyet
Administrator
Hero Member
Karma: +607/-168
Offline
Posts: 12268
Re: My first log
« Reply #8 on: December 20, 2020, 12:48:36 AM »
visualme7logger is a GUI front end, it requires the command line one as well.
You completely misunderstood everything here.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 22, 2024, 08:14:35 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
