Stop messing around with 3rd party tunes and risers and crap, you'll never get them working right. Also, do not post 3rd party tunes.

Flash stock, do your own stg1

How do you read the dump of the "original sportec"?
If in standard boot mode you try to read a flash soldered on the crypt-panel (from COBI Electronics), you will get a corrupted dump.
If you read the unsoldered chip in an external programmer, you will also receive an encrypted dump.
Both files will never work.
I think you already lost the sportec tuning dump.

PS: And I think that this loss is not worth much to regret.
Believe me, I dealt with files from sprotec in 2003 ... 2006 - nothing special and sometimes there were obvious errors in the calibrations ... ;-)

Here we see panels of the COBI crypt.
These panels have read protection with linear forward increment of address.
To bypass this option, the boot program must read addresses in random order.

First, thanks guys for the awnsers-
I know that the tunes are crap. i drove the car by my self and ist shitty.
But i just wanted atleast that the car runs after desoldering. And at this Moment i didnt had a Original File.

I tried to read the Flash a long time ago and i got a File that had something on 1024kb.
I desoldered the Riser and tried to read the Flash again. It worked and i got a file with 512kb.

I checked both files and the bigger one just had a longer hexcode filled with Nothing.
So i thought it would work. But ok.
I will try the original Tune.

And to the MPPS Problem: I´ve never had any issues with it.

All these super duper tunes can be read out over OBD.
And over OBD you do not have the problem with the increment-address because while you are reading the OBD the program is running from the same flash.

If RequestUpload is off then DDLI or RMBA will still always work... sigh.

Not that there is ANYTHING worth reading in there.