Pages: [1]
Author Topic: KFMIOP calculator 1.8T  (Read 6339 times)
mitkoenchev
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 93


« on: October 30, 2014, 04:36:46 AM »

Hi guys, since the excel KFMIOP interpolators available here don't seem to work on my PC, I decided to make my own. The problem is I'm not sure if it works good enough to be used. Can someone check that, please?
« Last Edit: October 30, 2014, 05:39:00 AM by mitkoenchev » Logged
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« Reply #1 on: May 10, 2020, 01:57:11 AM »

Anyone tested this yet?
Logged
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 192


« Reply #2 on: December 04, 2020, 08:58:20 PM »

I haven't flashed the changes to my car yet, but I have been pretty happy with my tune and after putting in all of the values as instructed in the spreadsheet it generated numbers that are pretty darn close to my current IOP table, so I'm thinking it's going to work well.
Logged
yangbohan
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 16


« Reply #3 on: January 12, 2021, 01:34:09 AM »

Thank you so much for sharing! I have been looking for KFMIOP calculation tables for MED17 and MG1, both 12*16 and 14*16
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)