Hello @all.
I'm searching for a definition file for the EDC15VM+ V
BOSCH No.: 0 281 010 683
Typformel: EDC 15VM+ 2.V1
VW No.: 038 906 012 FK
SW Version: 352255, SG3357
Engine: 1,9l R4 EDC, ASV (110 bhp/235 Nm)
Car: Seat Leon (1M1, 10/1999 - 10/2005)
Seat Toledo (1M2, 05/1999 - 12/2003)
For the moment I'm testing the original VP37 (0 460 404 977) on a self made test stand to get the actual pump voltage map (mrwUSO_KF) and the fuel temperature compensation map (mrwKTF_KF) to compare them with the maps in the software in the EDC15VM+.
After that I'll repeat the measurements with a similar VP37 equipped with a 12 mm plunger piston instead of the original 10 mm piston. Also the size of the nozzle bores is changed from 0.184 mm to 0.260 mm.
As my first goal I want to get the two maps for the 12 mm VP37 of the software and in a second step I want to change these maps to the new values.
Now I need a definition file for the software so that I can find the fuel temperature compensation map (mrwKTF_KF). I want to use TunerPro for the tuning of the maps afterwards ecause I like open source software.
It would be very kind if somebody can give me a definition file, most preferable a XDF file.
Here is a short video with an explanation and a short demonstration of the test stand:
https://youtu.be/x0YFMhK_xJsKind regards,
huebi
