Pages: [1]
Author Topic: ME7.5 EEPROM.bin Flash, recover from NLS  (Read 8160 times)
1.8Tvag01
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: July 10, 2020, 09:00:12 AM »

Hey!
While reflash from Stage 2 (with LC/NLS) to stock (with MPPS) suddenly it broke up and can`t write anymore with MPPS cause of Checksum ERROR while writing.

I used nefmotoflasher and got it to work writing the stock flash sucesfully but car won`t start because of DTC P0601 Internal Checksum Error

I read trough the Forum but don't really understand how to check the eeprom.bin for deathmode (16985 P0601)

Can someone please take a look at the eeprom.bin?

Or maybe it`s possible to take a 06A906032RP ECU instead a 06A906032HJ ? Because i have a spare one..

ECU: 06A906032HJ
Bosch Hardwarenumber: 0261207436
Bosch Softwarenumber: 1037362287
EEPROM 95040
Read with CMD


THANK You So much!!
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: July 10, 2020, 10:51:26 AM »

Sorry about the thread thrashing, thought this was an NLS post.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #2 on: August 12, 2020, 07:31:23 AM »

Hey!
While reflash from Stage 2 (with LC/NLS) to stock (with MPPS) suddenly it broke up and can`t write anymore with MPPS cause of Checksum ERROR while writing.

I used nefmotoflasher and got it to work writing the stock flash sucesfully but car won`t start because of DTC P0601 Internal Checksum Error

I read trough the Forum but don't really understand how to check the eeprom.bin for deathmode (16985 P0601)

Can someone please take a look at the eeprom.bin?

Or maybe it`s possible to take a 06A906032RP ECU instead a 06A906032HJ ? Because i have a spare one..

ECU: 06A906032HJ
Bosch Hardwarenumber: 0261207436
Bosch Softwarenumber: 1037362287
EEPROM 95040
Read with CMD


THANK You So much!!

Use this eeprom
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #3 on: August 12, 2020, 02:51:10 PM »

Just write again with mpps
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #4 on: August 12, 2020, 07:28:19 PM »

Just write again with mpps

Yes write Rom again then wrote this eeprom. Done
Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157


« Reply #5 on: September 03, 2020, 04:38:43 AM »

Hey,

if you want i can Flash your ECU in Bootmode with Checksumm Correction.
But the only thing is you have to send the ECU to me i will flash it if it comes and send it Straight back to you if you leave me all infos in a Message

LG X-Boost Performance

Gesendet von meinem SM-N975F mit Tapatalk

Logged
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122


« Reply #6 on: October 17, 2020, 10:41:14 AM »

I could be wrong, but I remember reading that there is a counter on how many times the EEPROM can be written to.
Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157


« Reply #7 on: October 17, 2020, 10:46:20 AM »

I could be wrong, but I remember reading that there is a counter on how many times the EEPROM can be written to.
OTP!

X-Boost Performance

Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #8 on: December 02, 2020, 06:53:13 AM »

OTP!

X-Boost Performance


Hardly lol I've flashed eeprom chips countless times. Otp lmao
Logged

Giving your mom a tuneup
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.045 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)