Pages: [1]
Author Topic: V6 Throttle Body TB 078133062C - Upgrade TFSI  (Read 1973 times)
lp2015
Newbie
*

Karma: +1/-8
Offline Offline

Posts: 13


WWW
« on: April 25, 2021, 03:55:24 PM »

Hello friends, I am trying to make this throttle body work on a 2.0 T engine, but I have an angle 2 tps error and the operation of it is reversed.

That is, I press the pedal and close the throttle body

I release the pedal and open the throttle body.

I ask for your help if it never works or should I solve it from the map.

Disassemble both bodies and with some other diagram I do not realize the error.

Thanks
Logged

justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 192


« Reply #1 on: April 25, 2021, 04:56:50 PM »

What About moving the terminal ends in the 2.0t wiring harness connector so they match the pin assignments from the donor vehicle??
Logged
lp2015
Newbie
*

Karma: +1/-8
Offline Offline

Posts: 13


WWW
« Reply #2 on: April 25, 2021, 04:59:30 PM »

The pin out I got claims to be plug and play, but it is not.

I have this image.

left 2.0T

Right V6
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)