boost request

Pages: [1]

« previous next »

Author

Topic: boost request (Read 4299 times)

armageddon

Sr. Member

Karma: +20/-14
Offline

Offline

Posts: 349

	boost request « on: May 05, 2021, 02:26:59 PM »

Why do I get different boost request if using fixed wgdc or not?

When doing linearization runs I get the boost request desired but as soon as revert CWMDAPP to stock boost profile changes and can not get it back to where it was.

Could it be camshaft angle? but why it messes before and after the switch? only had issues if it before the cam switch point, not after.


	Logged

armageddon

Sr. Member

Karma: +20/-14
Offline

Offline

Posts: 349

	Re: boost request « Reply #1 on: May 07, 2021, 05:51:49 AM »

Any ideas?


	Logged

armageddon

Sr. Member

Karma: +20/-14
Offline

Offline

Posts: 349

	Re: boost request « Reply #2 on: May 09, 2021, 12:35:33 PM »

No input at all? Need some more info from my side?


	Logged

Blazius

Hero Member

Karma: +95/-46
Offline

Offline

Posts: 1291

	Re: boost request « Reply #3 on: May 09, 2021, 01:16:26 PM »

I dont even really understand what you are asking ? Are you asking why are you getting different boost request with cwmdapp / ldrapp / fixed wdgc vs normal run?


	Logged

armageddon

Sr. Member

Karma: +20/-14
Offline

Offline

Posts: 349

	Re: boost request « Reply #4 on: May 10, 2021, 12:41:26 AM »

Yes, I adjust the request during fixed wgdc runs, but as soon as set cwmdapp to normal boost request lowered and can not get it to where it was, hbn is not limiting it and it is not responding to ldrxn changes past ~4500 rpms


	Logged

nyet

Administrator
Hero Member

Karma: +613/-172
Offline

Offline

Posts: 12356

	Re: boost request « Reply #5 on: May 10, 2021, 12:47:56 AM »

You didn't log any of the other load -> boost path caps/scalers (including nws). Why guess?

More importantly, why does it matter?

There are differences in the way req boost is calculated. If you find out what it is, what will change?

Just add or remove load request to get what you want.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

July 04, 2026, 02:56:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search