Pages: [1]
Author Topic: 8N0906018J KFVPDKSD/E axis location  (Read 2196 times)
nupustas
Full Member
***

Karma: +3/-7
Offline Offline

Posts: 122


« on: May 14, 2021, 11:23:08 PM »

Maybe someone knows KFVPDKSD/E wg pressure axis location? Tried comparing with other files, but i think it's still wrong adress. RPM and data location looks correct? If no big problem, WDKUGDN location would also be helpful .
« Last Edit: May 15, 2021, 02:37:00 AM by nupustas » Logged
nupustas
Full Member
***

Karma: +3/-7
Offline Offline

Posts: 122


« Reply #1 on: May 14, 2021, 11:26:27 PM »

and column adress:
Logged
gremlin
Hero Member
*****

Karma: +195/-9
Offline Offline

Posts: 650


« Reply #2 on: May 15, 2021, 12:45:29 AM »

and column adress:

$130EC
Factor = 0.0000610
Logged
nupustas
Full Member
***

Karma: +3/-7
Offline Offline

Posts: 122


« Reply #3 on: May 15, 2021, 02:48:28 AM »

$130EC
Factor = 0.0000610
Thanks for help. But i think there's something more that i didnt know. Axis looks to low (camparing to other files and posts in this forum), but now values increases from lowest to highest. Maybe everything ok, or maybe need another factor? (0.0000610 also used in all xdf i searched)
Logged
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« Reply #4 on: May 15, 2021, 03:43:34 AM »

maybe these tables are not used, check CWPLGU
Logged
nupustas
Full Member
***

Karma: +3/-7
Offline Offline

Posts: 122


« Reply #5 on: May 15, 2021, 03:57:08 AM »

maybe these tables are not used, check CWPLGU
Thanks for direction. Found topic about that, so going to read Cheesy
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)