Pages: [1]
Author Topic: DQ250 how to disable 6th gear  (Read 1356 times)
curamrdan
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 130


« on: July 16, 2026, 04:35:08 PM »

Hi, im asking this non-sense question, maybe,  but im working on hillclimb race car which is rules limited by performancefactor score and some points can be saved by reducing amount of gear, as car will never run 6th during race anyway.
Car drives in manual mode only.
Do anybody has tips, which parameters inside TCU file manipulate, please?
Logged
Ron28
Newbie
*

Karma: +1/-2
Offline Offline

Posts: 10


« Reply #1 on: August 09, 2026, 06:16:56 AM »

Do you have found a solution? If not, upload your file.
Logged
Dave9n3
Sr. Member
****

Karma: +27/-8
Offline Offline

Posts: 300


« Reply #2 on: August 09, 2026, 02:37:21 PM »

maybe increase auto upshift RPM for 5th gear to 9999 or FF when in manual mode. that way car will never jump to 6th.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 15 queries. (Pretty URLs adds 0s, 0q)