Clone ME7.1.1

Pages: [1]

« previous next »

Author

Topic: Clone ME7.1.1 (Read 2543 times)

RS6c5

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Clone ME7.1.1 « on: August 15, 2021, 02:06:38 PM »

Hello all,
I want to clone my Audi RS6 C5 ECU.
Ref: 4D1 907 558 (0004) Bosch ME7.1.1 HW: 0261207857 SW: 1037366304
I have a KTag clone, so I tried to read my ecu in boot mode but it's an echec. I have no errors while reading, however the eeprom file (ST95040) is empty. after several unsuccessful attempts I conclude that the method is not good.
Could you tell me a suitable method without having to invest in professional equipment
Thanks for your precious advice.


	Logged

RS6c5

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Clone ME7.1.1 « Reply #1 on: August 25, 2021, 01:38:29 PM »

Hello,
after many more hours of research and testing I still can not read my ecu in full Cry

I also try using "ME7 EEPROM" without success.

Please help me, I would really like to be able to save my ecu before starting tuning.

Thanks

Attached my extraction


	Logged

R32Dude

Full Member

Karma: +45/-10
Offline

Offline

Posts: 248

	Re: Clone ME7.1.1 « Reply #2 on: August 25, 2021, 05:26:27 PM »

I tried one of these on a different ecu

https://m.aliexpress.com/i/32355336386.html

Needs a slight mod with soldering iron to get 5v onto the correct pin.
After that, clip onto eeprom with ecu power off
And read/write to your hearts content.


	Logged

bamofo

Sr. Member

Karma: +34/-3
Offline

Offline

Posts: 420

	Re: Clone ME7.1.1 « Reply #3 on: September 02, 2021, 08:19:02 AM »

Full Clone will need Boot mode and two cables. I typically always use Galletto 1260 for the ROM and EEPROM tool with a cheap KKL cable off ebay. Command for that would be based off what chip it has...


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

January 07, 2025, 08:16:11 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search