Pages: [1]
Author Topic: Need help for ME 7.5 A4 B6 1.8T Pop and bang maps  (Read 2050 times)
ax0306
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: January 18, 2022, 07:11:02 AM »

HI anyone can help me please for a pop and bang on A4 1.8T ME7.5 . It's my first gasoline mod and i don't understand how finding map on this. My file have already a remap and hardcut.

I think i need these maps for a pop and bang. It's correct ?


KFTVSA
CWSAWE
KFZWMN
KFZWOP
KFZW
KFTVSAKAT
KFNWEGM

Bosch HW 0261206869
VW SW 8E0909018
354008


Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402



« Reply #1 on: January 18, 2022, 01:56:39 PM »

As covered a lot of times

KFTVSA
KFZWMN
Can use KFZWOP too
TVSAG0

Rest of the maps is useless for this purpose, also, use a stock file and avoid a lot of headache. Doing your own stage 1 is a piece of cake.
Logged
ax0306
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #2 on: January 19, 2022, 02:16:21 AM »

Thank you for your answer, now i need to find a damos or a2l file for my file.

Can you tell me please what is the most important for find a damos/a2l compatible with my file ? bosch HW , bosch SW , Audi SW  or both ?
Logged
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« Reply #3 on: January 19, 2022, 02:54:43 PM »

DONT change KFZW, this will only make your car run worse. Change CWSAWE, KFTVSA, KFZWMN, KFZWOP and if your ECU has it KFTVSAKAT and KFNWEGM. Besides tuning it would help to get a decat 3" downpipe, muffler delete and get RON 98/100.
Logged
ax0306
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #4 on: January 20, 2022, 07:30:22 AM »

DONT change KFZW, this will only make your car run worse. Change CWSAWE, KFTVSA, KFZWMN, KFZWOP and if your ECU has it KFTVSAKAT and KFNWEGM. Besides tuning it would help to get a decat 3" downpipe, muffler delete and get RON 98/100.

Thanks i have already straight pipe and decat to my car. I run on ethanol also

But my problem when i found Map location is the property(Factor, offset...) I don't understad how to do without a damos.   
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)