Pages: [1]
Author Topic: Can't find KLWGMX on Med17.1.1 8R0907115P  (Read 3150 times)
connor123me
Newbie
*

Karma: +5/-5
Offline Offline

Posts: 18


« on: December 17, 2021, 09:14:30 AM »

I am tuning a new ecu with slightly different version than my damos and other tuned files (8K2907115D). I have transferred 99% of the maps I need but I have looked for hours and cannot find the KLWGMX map. If someone could help me that would be amazing.
Med17.1.1 8R0907115P
Logged
gremlin
Hero Member
*****

Karma: +217/-20
Offline Offline

Posts: 768


« Reply #1 on: December 17, 2021, 10:09:25 AM »

cannot find the KLWGMX map.
Med17.1.1 8R0907115P

There is no KLWGMX map.
This firmware use 2D KFWGAMX map at $4F9D8 addr.
Axises - rpm and ambient pressure (fho - altitude factor).
« Last Edit: December 17, 2021, 10:12:27 AM by gremlin » Logged
connor123me
Newbie
*

Karma: +5/-5
Offline Offline

Posts: 18


« Reply #2 on: December 17, 2021, 12:31:59 PM »

There is no KLWGMX map.
This firmware use 2D KFWGAMX map at $4F9D8 addr.
Axises - rpm and ambient pressure (fho - altitude factor).

Thank you so much. I am having issues with my boost control and air mass spec control  and was wondering the waste-gate map would be triggering it. I transferred tune structures from my 8K290711D for my K04 to the 8R0907115P. If you could advise on what may be causing this it would be much appreciated.

https://datazap.me/u/connor123me/0-110mph-no-launch?log=0&data=13-20
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 15 queries. (Pretty URLs adds 0s, 0q)