Hi
I have such a problem with the Me7sum program
I can't find the output file with the code checked anywhere.
C:\Program Files (x86)\Me7sum>me7sum ARYupgraded.bin outARY.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'ARYupgraded.bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '40/1/ME7.5/5/4019.00//24b/Dst02o/220900//'
Part Number : 'Tuned'
Engine ID : '1.8L R4/5VT '
SW Version : '0001'
HW Number : '0261206790'
SW Number : '1037360287'
Step #2: Reading ROMSYS ..
Startup section: word[0x008000]+word[0x00FFFE]
@008038 Add=0x0081F7 CalcAdd=0x0081F7 ADD OK
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@00803c Add=0xA0920E CalcAdd=0xA0920E ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01bde6 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Reading RSA signatures ..
Searching for RSA offset #0...missing
Searching for RSA offset #1...missing
Step #4: Finding CRC table(s) ..
Searching for CRC table(s)...OK
CRC table(s) OK
Step #5: Reading Main Data Checksums ..
Searching for main data CRC pre block...OK
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...OK
Searching for main data checksum offsets...missing
Main CRCs:
0) 0x0183C8-0x0183D1 CalcCRC: F865666E
1) 0x010002-0x013FFE @8d93a CRC: 2935CB58 CalcCRC: D4DDF6DE(r) ** FIXED **
2) 0x014252-0x017F4E @8d940 CRC: 2FAFAB12 CalcCRC: 490D2C57(r) ** FIXED **
3) 0x018192-0x01FBDC CalcCRC: 6F7CF064(r)
4) 0x026A00-0x02FFFC @8d946 CRC: 4B83ED1C CalcCRC: 292E084D(r) ** FIXED **
Step #6: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1f702 [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 48D03D91
0x00FC00-0x01FFFF CalcChk: 21461A22 CalcCRC: 5AB4F727 SKIPPED
2) 0x020000-0x0FFFFF
<fffe0> Chk: 5650FEC0 CalcChk: 5650696D ** FIXED **
Step #7: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
4) <1fc0e> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 71 checksums in ARYupgraded.bin
Attempting to output corrected firmware file 'outARY.bin'
├ż Opening 'outARY.bin' file for writing
├ż Writing to file
├ż Validating size correct 1048576=1048576
├ż All OK, closing file
*** DONE! 9/9 error(s) in ARYupgraded.bin corrected in outARY.bin! ***
C:\Program Files (x86)\Me7sum>me7check outARY.bin
==============================================================================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file outARY.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4019.00//24b/Dst02o/220900//
-> Contents of ECUID data table:
- '0261206790' (SSECUHN)
- '1037360287' (SSECUSN)
- 'Tuned' (VAG part number)
- '0001' (VAG sw number)
- '1.8L R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> No errors found. File is OK. *********************
Where should I look for file outARY.bin? It is not in the me7sum directory. Request to check the checksums in my bin file.
Can somebody help me correct my checksum?
thanks
