Pages: [1]
Author Topic: me7_905040 tool by ArgDub Issues  (Read 2798 times)
Myturbodiesel77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« on: October 30, 2022, 08:18:52 PM »

Working my way through turning off immo on my me7.5 ecu. I have been trying to get the me7 eeprom tool to work. It wont take my commands and says access denied. Windows also is telling me my pc cannot run program. Has anyone else had this issue? Using windows 64 bit. I have tried using the program with windows 32 bit in a virtual machine but still get the same issue. Any info/tips would be appreciated!
« Last Edit: November 08, 2022, 07:30:57 PM by Myturbodiesel77 » Logged
Myturbodiesel77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #1 on: October 30, 2022, 08:20:33 PM »

here are some screenshots that i forgot to upload.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« Reply #2 on: October 30, 2022, 11:35:02 PM »

change the settings/permission/compatibility mode of the exe file
Logged
Myturbodiesel77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #3 on: November 06, 2022, 02:16:22 PM »

Ive had some time this weekend to mess around some more. I have attempted security changes and permission changes with no luck. I think im going to attempt to download windows 7 and try it there. On the flipside, I got my galletto 1260 cable to work, yay. Successfully read and wrote my ecu in bootmode.
« Last Edit: November 08, 2022, 07:34:20 PM by Myturbodiesel77 » Logged
Myturbodiesel77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #4 on: November 08, 2022, 07:29:28 PM »

I've accomplished my goal of immo delete. My mpps v18 cable came in. It has boot mode eeprom read and write for me7.5 ecus. Very awesome tool as I explore more. Thank you for the advice on the program issues. I couldn't crack it. Tossed the blue kkl cable away in a drawer.
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #5 on: November 08, 2022, 10:36:17 PM »

You didn't follow the commands properly.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0s, 0q)