Pages: [1]
Author Topic: ME7.5 1.8T AMK NLS  (Read 1118 times)
damkys500
Jr. Member
**

Karma: +0/-11
Offline Offline

Posts: 42


WWW
« on: December 19, 2022, 06:50:01 AM »

Hello guys, I did 2StepScript LC on my S3 1.8T, it works but NLS doesn't, I read something about NLS Counter but I can't figure out what exactly needs to be adjusted. I made XDF specifically only for Speed Threshold, Launch RPM, Ignition Cut Duration, RPM Threshold, FTOMN, Acc Pedal Threshold.

SpeedThreshold - 3.3km/h
LaunchRPM - 4500rpm/min
IgnitionCutDuration - 500ms
RPMThreshold - 5000rpm/min
FTOMN - 0ms
AccPedalThreshold - 90%

can you please help me fix NLS to work?
Logged

sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #1 on: December 19, 2022, 11:09:53 AM »

you are use stock engine ?
maybe yes
simple disable nls and not use
otherwise rods out the block ....
Logged
damkys500
Jr. Member
**

Karma: +0/-11
Offline Offline

Posts: 42


WWW
« Reply #2 on: December 19, 2022, 12:19:57 PM »

you are use stock engine ?
maybe yes
simple disable nls and not use
otherwise rods out the block ....

no, it is fully forged
Logged

sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #3 on: December 19, 2022, 01:01:11 PM »

no, it is fully forged
try
IgnitionCutDuration - 100ms
Logged
damkys500
Jr. Member
**

Karma: +0/-11
Offline Offline

Posts: 42


WWW
« Reply #4 on: December 20, 2022, 09:15:30 AM »

try
IgnitionCutDuration - 100ms

thanks, I'll try it when I go to the car
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)