Pages: 1 [2]
Author Topic: Basic questions regarding knock retard  (Read 5664 times)
nupustas
Full Member
***

Karma: +3/-7
Offline Offline

Posts: 122


« Reply #15 on: October 23, 2022, 07:36:45 AM »

My experience is exactly the opposite.
Interesting info, but sounds logical: bigger port, more flow, lower egt. Is the difference significant? I always used large port heads, so cant compare.So maybe larger cams also could help with more timing?
Logged
blairl
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 69



« Reply #16 on: February 03, 2023, 05:11:00 PM »

I implemented the PRJ/Elray/RS4 feed forward PID badly
The root cause of this problem was LDRPID was out to lunch.
I hope this helps someone. 


Best of luck,
Blair

Logged

LAMFAWKR, did anyone else find this variable funny?
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)