ME7.5 CAN output capabilities.

Pages: [1]

« previous next »

Author

Topic: ME7.5 CAN output capabilities. (Read 5503 times)

grifrowl

Full Member

Karma: +5/-1
Offline

Offline

Posts: 56

	ME7.5 CAN output capabilities. « on: May 29, 2015, 03:34:41 PM »

To what degree is the CAN output of the ME7.5 programmable? Could I create a function to output new CAN messages, or am I stuck with a separate microcontroller to do something like this?


	Logged

sonique

Sr. Member

Karma: +24/-12
Offline

Offline

Posts: 283

	Re: ME7.5 CAN output capabilities. « Reply #1 on: May 30, 2015, 08:05:58 AM »

i think ..no


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: ME7.5 CAN output capabilities. « Reply #2 on: May 30, 2015, 11:30:22 AM »

In theory, anything is possible if you have the code and RAM space for it (and obviously the ability to write arbitrary code for the ECU)


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

grifrowl

Full Member

Karma: +5/-1
Offline

Offline

Posts: 56

	Re: ME7.5 CAN output capabilities. « Reply #3 on: June 01, 2015, 07:56:12 AM »

Quote from: nyet on May 30, 2015, 11:30:22 AM

anything is possible

I guess I'll dive in then. Would you say the Anti-lag/No-lift shift thread would be a good start to acquiring these skills?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: ME7.5 CAN output capabilities. « Reply #4 on: June 01, 2015, 10:32:11 AM »

I'd start with learning assembler (if you don't already know it).


	Logged

grifrowl

Full Member

Karma: +5/-1
Offline

Offline

Posts: 56

	Re: ME7.5 CAN output capabilities. « Reply #5 on: June 01, 2015, 10:52:21 AM »

That's kinda what I meant. Thanks man!


	Logged

flaattire

Full Member

Karma: +2/-0
Offline

Offline

Posts: 68

	Re: ME7.5 CAN output capabilities. « Reply #6 on: June 01, 2015, 09:27:12 PM »

Try a can-bus shield + arduino in the meantime. Much easier.


	Logged

grifrowl

Full Member

Karma: +5/-1
Offline

Offline

Posts: 56

	Re: ME7.5 CAN output capabilities. « Reply #7 on: June 02, 2015, 04:28:08 PM »

Quote from: flaattire on June 01, 2015, 09:27:12 PM

Try a can-bus shield + arduino in the meantime. Much easier.

That's the setup I'm currently using. The only issue is that arduino is kinda slow when I am attempting to read and write CAN commands at the same time.


	Logged

musicleecher

Newbie

Karma: +0/-0
Offline

Offline

Posts: 5

	Re: ME7.5 CAN output capabilities. « Reply #8 on: February 12, 2023, 08:41:44 PM »

Quote from: grifrowl on June 02, 2015, 04:28:08 PM

That's the setup I'm currently using. The only issue is that arduino is kinda slow when I am attempting to read and write CAN commands at the same time.

I'm using an ESP32, more than fast enough Wink


	Logged

prj

Hero Member

Karma: +1072/-481
Online

Online

Posts: 6037

	Re: ME7.5 CAN output capabilities. « Reply #9 on: February 13, 2023, 03:30:58 AM »

Do you realize you replied to something that was posted 8 years ago?


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 09:35:33 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search