Pages: [1]
Author Topic: Audi TTS Mass Air Flow Sensor in CDLA Engine  (Read 2533 times)
Murphy1981
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 5


« on: September 14, 2021, 01:31:20 PM »

Good evening community,

I could use your help.
I would like to install the Audi tts (0 280 218 175) LMM on my CDLA ea113 engine.
Problem is I can't find a suitable Damos file or any info on exactly which values need to be changed.
I've been searching the internet for weeks but unfortunately without success.
What I find a little strange is that the TTS engine is also an ea113, but really none of my Damos files work.according to my logic, a Damos for virtually the same engine should work nevertheless.or is there a difference in the data between Audi and VW?
Maybe someone here has experience with the conversion and perhaps knows the exact values that need to be changed.
I would really appreciate any help.
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #1 on: September 14, 2021, 02:42:19 PM »

becauce audi tts maf different other cdl engine maf
and calibration map size is different
tts maf bosch other cdl maf hitachi
very different calibration map
but tts binary flash your car i think not any problem
« Last Edit: September 18, 2021, 03:32:57 PM by sonique » Logged
kampfpudding
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #2 on: September 18, 2021, 01:02:18 PM »

i calibrated this long time ago.

works 100%...

here free 4 all persons, which can operate winols...
Logged
kuebk
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 47



« Reply #3 on: September 18, 2021, 03:25:36 PM »

DAMOS describes particular software revision, there may be a lot of different software revisions for same engine code.
Logged

VAG immo solutions (clone, immo off, repair) MEDC17, SIMOS, SDI, BCM2, ELV, DQ/DL/VL gearboxes, INVCON, MED9.x crypto
artec12
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 12


« Reply #4 on: February 11, 2023, 02:18:01 PM »

i calibrated this long time ago.

works 100%...

here free 4 all persons, which can operate winols...

I can see that although the TTS Sensor is much larger the MSHFMTPH map has lower max values in kg/h. Can you explain that?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)