Pages: [1]
Author Topic: Me7.5 from AWT - analogue RPM output and check engine output.  (Read 1369 times)
ratosluaf
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 37


« on: February 26, 2023, 10:20:04 PM »

Hello, I am in progress of swapping 1.8t (engine code AWT) to another chassis. I need to work around analogue RPM signal to tacho and check engine signal. I found that I can use pin 37 for RPM signal and pin 47 for check engine light but this info is for transverse mounted  engines.
My ecu number is 4b0906018dh, and what i get from pinout is i don't even have cable on pin 47, and pin 37 is used to A/C system. I tried to search for info on the web, but found nothing. Maybe someone can help me before I get oscilloscope and check all the pins in ecu?
Logged
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« Reply #1 on: February 27, 2023, 11:51:35 AM »

if it can help you
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« Reply #2 on: February 27, 2023, 11:52:47 AM »

...
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
ratosluaf
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 37


« Reply #3 on: February 27, 2023, 10:15:46 PM »

Thanks. According to that, analog RPM output is still there on pin 37. I also found in 2000 Audi A4 wiring diagram that 47 should be check engine light and 48 epc light. Will try and check. Thanks!
Logged
ratosluaf
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 37


« Reply #4 on: March 21, 2023, 03:42:53 AM »

Yup, rpm on pin 37, check engine on pin 47 - ecu grounds it when mil is on. Everything works fine.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 19 queries. (Pretty URLs adds 0s, 0q)