Pages: 1 [2]
Author Topic: Ignition system failure, no spark.  (Read 16074 times)
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #15 on: May 06, 2023, 02:05:18 PM »

Success, the M3.8.4 Ecu I got is adapted to the car.
I just needed to read out the immo PIN code from the cluster with VAG Commander and then adapt the ECU with VCDS.
So now the car runs on all cylinders, no hesitations.

Sadly the idle is quite high.
And from the exhaust it is a real smokeshow.
Maybe alot of fuel and oil residue in the exhaust/manifold and the catalytic converter?

The car arrived just working on two cylinders.
Oil in the sparkplug wells.
The oxygen sensor was shot too.
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)