Pages: [1]
Author Topic: VR6 R32 cam overlap question  (Read 1095 times)
R32Dude
Full Member
***

Karma: +45/-10
Offline Offline

Posts: 242



« on: July 31, 2023, 06:23:55 AM »

Anyone know if the stock vvt at WOT  for the vr6 r32 is factory tuned for full performance or for soft clutch engagement?
The log below is from my stock car, there is some huge cam overlap before the dsg clutch fully engages. I wonder if anyone here has put a similar car on a dyno and played with the vvt at the low RPM range to see if the overlap is beneficial for torque?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)