Pages: [1]
Author Topic: 8D0907551C - Replace 512K flash with 1M  (Read 4542 times)
NickB5
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 27



« on: August 21, 2018, 01:02:32 AM »

Hi,

I have a spare 8D0907551C for my S4 (original is also a 8D0907551C).
Was able to get the file off of it using a bench setup and galetto (was already tuned, nefmoto didn't work).

When following the tuning guide I can't find KFLBTS in TunerPro using the latest definition file I found here for the 8D0907551C.
There are probably others ways to achieve the same but it would be nice if the definitions matched the guide (the learning curve is already steep enough as it is Cheesy).

Is it possible to replace the AM29F400BB flash with an AM29F800BB and flash an M-Box file?
Logged
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 210


« Reply #1 on: August 21, 2018, 03:19:27 AM »

I think no. I have here an 512 and 1024kb ECU's, and there are some IC's and circuit drivers that the 1024kb has and the 512kb not. So its not a question of only replacing the nand.
Logged
NickB5
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 27



« Reply #2 on: August 21, 2018, 07:11:58 AM »

Ok then I'll go on the lookout for a 1M ECU.
Am I right that all the 1M ecu's (ME7.1 S4 and A6) are flashable with the M-Box file?
I read it's difficult to change the coding from auto to manual, so probably best to start with a manual box?
Logged
NickB5
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 27



« Reply #3 on: August 21, 2018, 01:37:07 PM »

A tip ecu in a 6sp car should be possible according to some posts.
So bought a 4Z7907551M off ebay.
6sp ecu's seem to be pricey.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: August 21, 2018, 02:56:51 PM »

A tip ecu in a 6sp car should be possible according to some posts.
So bought a 4Z7907551M off ebay.
6sp ecu's seem to be pricey.

All 2.7t ME7.1 1M ecus are cross flashable

ME7.1.1 is not cross flashable with ME7.1

http://files.s4wiki.com/stock/part-numbers.txt
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
NickB5
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 27



« Reply #5 on: August 22, 2018, 01:13:37 AM »

Thanks for the confirmation Nyet!
Maybe something that can be added to the wiki?
Or maybe I didn't look hard enough Smiley
Logged
kosiik
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #6 on: August 03, 2023, 01:46:49 PM »

please. Can I replace this old ECU 8D0907551C with a newer 4b0907551M ? Newer ecu Is from A6 biturbo one with a 1Mb file with software for a newer AGB? Thank you

Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #7 on: August 04, 2023, 03:18:20 AM »

please. Can I replace this old ECU 8D0907551C with a newer 4b0907551M ? Newer ecu Is from A6 biturbo one with a 1Mb file with software for a newer AGB? Thank you

Yes, but flash 8D0907551D into the 4B0907551M if you want the ECU to work with your car without any modifications.
Or if you want it is possible to double stack the 551C file, and that will work as well (although that probably defeats the purpose).
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0s, 0q)