Pages: 1 [2]
Author Topic: SAI remove  (Read 4937 times)
JeanAwt
Full Member
***

Karma: +8/-11
Offline Offline

Posts: 205


« Reply #15 on: November 06, 2023, 12:16:46 AM »

winols opened this bin without errors?

Winols gives me an error even though I have plugins on chk

bin with 032hjworks fine .. maybe broken flash ?

yes opened without error....what ols version do you have? i have 74chk ols 262
Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #16 on: November 06, 2023, 04:34:37 AM »

maybe i have broken ols ?
Just 73chk

Logged
_nameless
Hero Member
*****

Karma: +327/-454
Offline Offline

Posts: 2727



« Reply #17 on: November 06, 2023, 08:37:06 AM »

Is there any kind soul out there that can show me how to turn off sai?
I tried turning off the eskonf and disconnecting the sai pump and solenoid 112 but the car still gives the DTC and bad starts.

now its AA FF 00 30 FF FB 3C


Thank you



So, you had the circuit diagnostics disabled correctly. However, you will need more than just the circuit diagnostics for a proper sai delete. The prokon (project configuration bit switches) need to be set to zero, mainly CDSLS, and best off setting CWKONABG to zero. Anyway I made the changes for you on the original file you posted. Not needed but for completeness I set  MSLUB and MSLBAS to zero and FHOKH to FF.
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #18 on: November 06, 2023, 03:51:22 PM »

WinOLS says file has bad chk ?

possible ?
or do I have something wrong with ols?

Were you able to open it without errors?
Logged
_nameless
Hero Member
*****

Karma: +327/-454
Offline Offline

Posts: 2727



« Reply #19 on: November 06, 2023, 04:11:05 PM »

WinOLS says file has bad chk ?

possible ?
or do I have something wrong with ols?

Were you able to open it without errors?
Checksums done using ECU Fix. Not trying to be rude but Im not going to help you diagnose counterfeit software. 
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #20 on: November 07, 2023, 04:25:27 AM »

I updated my ols and now everything is fin
Logged
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #21 on: November 07, 2023, 10:51:10 AM »

Please .. if i set this cons. to 0 .
Readiness in vcds will be green ?

    SRYAGR (0x810974) - Threshold for Readiness formation EGR diagnosis (unused)
    SRYHS (0x810975) - Threshold for Readiness formation O2 sensor heating diagnosis (ready bit 6)
    SRYKAT (0x810976) - Threshold for Readiness formation catalyst diagnosis (ready bit 0)
    SRYLS (0x810977) - Threshold for Readiness formation lambda sensor diagnosis (ready bit 5)
    SRYSLS (0x810978) - Threshold for Readiness formation SAI diagnosis (ready bit 3)
    SRYTES (0x810979) - Threshold for Readiness formation canister purge diagnosis (ready bit 2)

thanks
Logged
zCruuz
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« Reply #22 on: November 09, 2023, 01:09:06 AM »

Please .. if i set this cons. to 0 .
Readiness in vcds will be green ?

    SRYAGR (0x810974) - Threshold for Readiness formation EGR diagnosis (unused)
    SRYHS (0x810975) - Threshold for Readiness formation O2 sensor heating diagnosis (ready bit 6)
    SRYKAT (0x810976) - Threshold for Readiness formation catalyst diagnosis (ready bit 0)
    SRYLS (0x810977) - Threshold for Readiness formation lambda sensor diagnosis (ready bit 5)
    SRYSLS (0x810978) - Threshold for Readiness formation SAI diagnosis (ready bit 3)
    SRYTES (0x810979) - Threshold for Readiness formation canister purge diagnosis (ready bit 2)

thanks

Irrc i have readiness reading "correct", but never modified what you mention here, which exact maps i'd have to check.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 17 queries. (Pretty URLs adds 0s, 0q)