Pages: [1]
Author Topic: Me7.1.1 immo error eepromtool  (Read 3585 times)
mrurbina
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: March 04, 2023, 12:35:13 PM »

So i get an error when I read the original file with eepromtool_04
Immobilizer: error, set immo -current values :0x12 =0xFF, 0x22=0xFF

1st time running into this . Had a check sun error too but I was able to fix that.

TIA.

ECU is a 2004 Touareg VR6 not fsi
Logged
Bosch99
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #1 on: September 22, 2023, 11:05:28 PM »

Hello,

Have you already solved this?

If yes, please, sharing.

Thank you
Logged
akidor
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 4


« Reply #2 on: November 14, 2023, 05:08:40 AM »

Post your eeprom file
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)