Hi, its my first post here sorry if in wrong thread. Until now i've been remapping only diesels so i got no experience at all in this gas stuff
The car is an 1999 Audi TT mk1 1.8T AJQ 180hp with ME7.5 8N0906018AB 0002 and I really want to make good pop and bangs/burbles map on AC
I've got some success with my file, made it to pop only on AC with:
KFTVSA zeroed,
KFZWOP/2 -21 in rpm range, lowest 2 rows
KFZWMN -30 in rpm range, lowest 2 rows
KFZWMS -30 in rpm range, lowest 2 rows
DNWEK 7000rpm

The problem is i get only single or 2-3 pops and they arent really that loud and no burbles
Also, on standstill i get no pops whatsoever, i know this is fixed with TVSAG0 but i don't have it in my mappack and can't find it.
I also don't have and can't find CWSAWE.

What should I do more to get good amount of pops and burbs?
And how can I find TVSAG0 and CWSAWE? I'm attaching my file and KP I have for it
Thanks!

I haven't looked for TVSAG0, all firmware similar to yours don't have CWSAWE OR TVSAG0. I also dissembled one version that have CWSAWE and CWSAWE just seems to be something that isn't implemented in your firmware

https://imgur.com/a/TKcdhpL

Could use assembly to make the car believe gangi is over 0 (not neutral) or patch NWE to be set at fixed value