Hello, I am attempting to run an audi a5 b8 2.0tdi caha manual transmission ecu in a petrol Q5 with the 8 speed tiptronic driven by a us spec cjaa. I have the engine installed and running fine already

Using the funktionsrahmen I have changed trans type, gearbox intervention, engine type and a variety of other data fields in the ecu but I am still getting p0614.

There is this post from a Belarusian individual that made it work with a 3.0t to 4.0t swap but not much information is there.
https://www.drive2.com/l/560647852024397875/
(If your in here help me out please)                                                                                                     

I keep getting error 31/out of range in vcds when trying to code it to automatic.
Maybe I am missing something?

From what the FR says this is possible within the ecu it just needs turned on.

Unfortunately I don't have access to a programmer capable of pulling the trans file so I am at the mercy of just smudging the communications data.

any insight is appreciated.