NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > looking for good base tune 2003 passat
Pages: [1]
« previous next »
Author Topic: looking for good base tune 2003 passat  (Read 4757 times)
Thedge87
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 2
« on: May 30, 2015, 06:26:35 PM »
i have a  2003 awm 1.8t passat with ecu 4b0906018dq it is auto trans all stock except cat delete looking for a stage 1 nothing to aggressive...  new to this and looking for some advice
 
Logged
nyet
Administrator
Hero Member
*****

Karma: +605/-168
Offline Offline

Posts: 12248


WWW
« Reply #1 on: May 30, 2015, 07:23:31 PM »
This is a DIY site.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
MadCow
Full Member
***

Karma: +3/-1
Offline Offline

Posts: 108
« Reply #2 on: May 31, 2015, 09:10:05 AM »
The community B6 tune is a great base, just port the maps over to whatever bin you decide to use.
Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150
« Reply #3 on: May 31, 2015, 10:45:07 AM »
I agree with MadCow... The community B6 project is all you need to follow for the results you want. Get a copy of TunerPro and go to town. Sure just flashing some random tune takes less time but you end up not knowing what has been changed. My first random flashed stage 1 from here had timing for WMI for example. I'm surprised I didn't grenade my stock engine. You don't either I'm sure.

Follow the prevailing wisdom and DIY. The community projects have made it almost simple compared to sifting through threads and putting all the info together yourself.

DDillinger was kind enough to provide an .xdf for the 018DQ in this thread: http://nefariousmotorsports.com/forum/index.php?topic=7408.msg68505#msg68505

Set up TunerPro so you can use a keyboard shortcut with ME7check and ME7sum and you will be quite happy I think.
Logged
Go ahead and give me negative karma... I don't care if you like what I post princess.
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #4 on: May 31, 2015, 11:49:55 AM »
The B6 A4 and B5.5 Passat files are VERY similar. In the case of the 518BC file the only differences are calibration. You are in a very good position to just copy the B6 community changes in using my xdf.

Welcome, and good luck.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
adriangent
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #5 on: October 17, 2024, 07:32:04 PM »
Hi! sorry for bringing back this old post! im learning and have a question. before flashing this in to my ecu should i check the checksums?
Logged
EanDem
Full Member
***

Karma: +8/-40
Online Online

Posts: 76
« Reply #6 on: October 18, 2024, 03:25:54 AM »
You must. It is not optional if unsure about flash tool to have this capability.
Logged
adriangent
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #7 on: October 19, 2024, 08:34:39 PM »
Thanks!! ill do that and try it on my car
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • October 22, 2024, 03:44:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)