Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
How would I begin to do a checksum on Simos 3.3
Pages: [
1
]
« previous
next »
Author
Topic: How would I begin to do a checksum on Simos 3.3 (Read 241 times)
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 99
How would I begin to do a checksum on Simos 3.3
« on: November 18, 2024, 04:38:41 PM »
I deleted a dtc did checksum flashed it everything went well starts up fine.
Winols doesn't seem to do all the checksum for all dtcs . I have more dtcs to delete.
Where would I start or if I was to correct it manually is there a program to use .Am I correct That Simos 3.3 is an 8bit ?
Kind regards
Logged
cherry
Sr. Member
Karma: +26/-2
Offline
Posts: 260
Re: How would I begin to do a checksum on Simos 3.3
« Reply #1 on: November 18, 2024, 10:56:33 PM »
Just contact EVC if there is a problem in Winols checksum, they have great support.
Logged
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 99
Re: How would I begin to do a checksum on Simos 3.3
« Reply #2 on: November 19, 2024, 11:49:09 PM »
I get that . I would like to learn how to do it manually . If i went down this route is the checksum actually in the map itself. Does it start or end with a zero? And when checksum is corrected does the modified file just need the checksum to read the same as the original file or should i say match up. If i use tuner pro from what i understand it will only except a bin file and not just file well the free version anyway
Logged
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 99
Re: How would I begin to do a checksum on Simos 3.3
« Reply #3 on:
Yesterday
at 01:35:55 AM »
On hex editor I'm comparing files. If I go to checksum section in picture attached I'm not sure what it means
«
Last Edit:
Yesterday
at 01:38:17 AM by Rick81
»
Logged
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 99
Re: How would I begin to do a checksum on Simos 3.3
« Reply #4 on:
Yesterday
at 01:43:03 AM »
Quote from: Rick81 on
Yesterday
at 01:35:55 AM
On hex editor I'm comparing files. If I go to checksum section in picture attached I'm not sure what it means
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 21, 2024, 11:32:56 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
