The site search function does not work, try searching nefmoto from browser to find info on your ECU software number, something like search line;
site:http://nefariousmotorsports.com 022906032BG
but use whatever exact ECU number you actually are looking for.

I dont find a xdf for 022906032BG but there is a winOLS kp file for it at thread;
https://nefariousmotorsports.com/forum/index.php?topic=18756.msg141690#msg141690

Also note that ME7.1.1 requires that you remove a resistor from the board to be able to enter boot mode for EEPROM reads/writes, then the resistor must be replaced to enable regular OBD port flashing;
http://nefariousmotorsports.com/forum/index.php?topic=21504.0

Is there maybe a good converter for .kp to.xdf? I dont habe OLS and no friends with it.

And is it possible that my ECU is already flashed? Motor goes up to a lil over 7k rpm and with MPPS i coud read a good bin file. It shows that its already flashed once so do i still need to do the resistor and boot mode?

Gesendet von meinem SM-A336B mit Tapatalk