Pages: [1]
Author Topic: What do i need?  (Read 4865 times)
Rousie
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« on: August 24, 2012, 04:03:18 PM »

Hello all, i gladly found this forum in frustration!

I'm from the UK and have got a 2003 VW Caddy Van 1.9 TDI with a Bosch EDC15V ECU.

I am basically wanting to know what hardware / software i need to buy to remove the IMMO check from the ECU.

Basiaclly, we lost the keys to the van, bought new barrel and keys, and not understanding how much of a pain it actually is to get the SKC from the clocks. After days of trying, i've finally pulled the ECU, got a nice bench rig setup, awaiting for some kind soul to help me out.

I've got a Vag-Tacho Cable, and a cloned Vag-Com Cable, which has been disabled (Dispite my best efforts to bring it back alive)

I don't mind picking up a galletto cable, or similar if it will help me get the van running.

Any help or posts you can point me to would be great, as i've spent hours browsing, and running into dead ends.

Regards,
Dean
 
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #1 on: August 24, 2012, 05:29:45 PM »

http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=
Logged
Rousie
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #2 on: August 25, 2012, 01:15:32 AM »

This doesn't work for EDC15v ECU does it?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #3 on: August 25, 2012, 04:37:32 AM »

If not then VAGDASH-CAN
Logged
Gonzo
Sr. Member
****

Karma: +21/-30
Offline Offline

Posts: 483


« Reply #4 on: August 25, 2012, 09:50:02 AM »

That's for ME7 not EDC15  Roll Eyes
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #5 on: August 25, 2012, 12:54:37 PM »

Then a VAGDASHCAN should do it.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)