Pages: [1]
Author Topic: Bosch MG1CS002 - 06M907309H from RS5 to Cayenne S  (Read 671 times)
bojan.u
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: May 22, 2026, 05:34:25 AM »

Hello,

my original ecu Bosch MG1CS002 Cayenne S (9YA) - 06M907309H is been melted so it was accessible for reading, but has hardware damage (injector drivers, etc..)

So I buy used one, same number, HW, but itsa from Audi RS5 with same engine. Im not expert so my question is it possible to somehow flash the ECU from an Audi RS5 into using Porsche Cayenne files? ECU has same numbers and HW (2.9 tfsi).
Logged
bojan.u
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: May 23, 2026, 01:15:04 AM »

Maybe I worded that a bit poorly. Has anyone managed to use an Audi ECU and flash only the engine part of the software into it without changing the boot and SW?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.082 seconds with 16 queries. (Pretty URLs adds 0.06s, 0q)