Yes my tool did wrote it, and I was only able to dump my ECU with mpps on 29F800 layout.
As you said doubled, is there any walkthrough how could I edit the low half and the high half with the 512kb damos?
It would be a charm to make it work with my original dump. Thanks for replying.
I’ve never personally ran into this situation so I have no experience trying to chop up a file that was read incorrectly in order to make it usable but my guess is you would open the 1024kb read in a hex editor, delete the bottom half of the hex where the 512kb binary ends and the exact copy begins again and just delete the copy at the end leaving only the first half of the file. Save it as a new binary and run it thru checksum corrector. But in my experience when customer sends me a file like this I just find a fresh original file to work with or in 95% of cases I already have a tuned file ready to go for them if it’s me7.5 for example I have like 4 different variations of your exact ECU part number and the original just chillin
