Does the 551L box from a 2000 A6 have immobilizer issues?

Pages: [1]

« previous next »

Author

Topic: Does the 551L box from a 2000 A6 have immobilizer issues? (Read 5005 times)

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Does the 551L box from a 2000 A6 have immobilizer issues? « on: May 09, 2013, 11:14:44 AM »

I am trying to buy an extra ecu. Does the 551L box from a C5 A6, APB engine, share the same immobilizer issues that the allroad ecu's have?

Can I just flash an M box file on there and be good? Thanks.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #1 on: May 09, 2013, 11:19:09 AM »

It will work fine. You may need to use bootmode to flash it the first time.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #2 on: May 09, 2013, 11:22:28 AM »

Ah, thanks. The L ecu's were hitachi maf right? Going to plug this in just to get my car moved.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #3 on: May 09, 2013, 11:27:25 AM »

Yes, I believe it is hitachi. However, L-box is tip (iirc).

I'd just flash it to M.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #4 on: May 09, 2013, 11:38:32 AM »

2000 a6 is a bosch maf, and has no immobilizer. As such, the ecu plug is the same as the s4. If you get a 2001-2002 ecu you will have to modify the large ecu connector in order to use it in the non-immobilizer equipped car, and either defeat the immobilizer or flash it in bootmode as nyet has said.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #5 on: May 09, 2013, 01:43:47 PM »

I ran an L box APR Stg 1 ecu in my Allroad before my manual swap. I had to remove the plastic tab on the ecu's socket so my connector would plug in. There was nothing I had to do about the Immobilizer though. I plugged it in and ran just fine.

But since the 2000 A6 would use a bosch maf, That too will be corrected for my hitachi maf with an M box flash. Just going to put a stock file on it to use as back-up. So now i guess I have two ECU's to flash in boot mode.

Flasing on board in the Allroad is such a pain. I swear the car refuses to flash via OBD. Will have to make a better bench flashing setup.

Thanks for the input guys.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Does the 551L box from a 2000 A6 have immobilizer issues? « Reply #6 on: May 09, 2013, 02:41:17 PM »

Quote from: stuklr on May 09, 2013, 01:43:47 PM

Flasing on board in the Allroad is such a pain. I swear the car refuses to flash via OBD. Will have to make a better bench flashing setup.

Once you disable immo (or use a non-imo ECU file) it is a lot easier... you may have to reduce baudrate though.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 08:29:50 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search