Pages: [1]
Author Topic: Log guru's help needed please  (Read 4887 times)
Boost401
Newbie
*

Karma: +8/-1
Offline Offline

Posts: 21


« on: September 04, 2012, 05:53:09 AM »

My first time trying to use me7 logger with ecux plot .......don't even know if I did it right but here it is .... So my car has been running like shit lately and hopefully these logs will tell me something (or the experts) .... Apr stage 1 tip a6 if there's anything else I should plot let me know...Tia For any help and time for looking at the logs










Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: September 04, 2012, 08:35:04 AM »

Did you pressure test?

What are you LTFTs?

Your act boost never reaches req on boost ramp. Could be a boost leak. Was it ever running right?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Boost401
Newbie
*

Karma: +8/-1
Offline Offline

Posts: 21


« Reply #2 on: September 04, 2012, 11:50:43 AM »

I am going to pressure test as soon as I can........ It has always felt down on power though...  My symptoms are:
 if I ram the pedal to the floor it seems to bog, and maybe a slight studder....
if I push the pedal down slowly the car seems to accelerate a little better 

No cel's

I know its not the best way measure power but also I've done some timed 0-60 runs and I'm in the 7.4-7.8 range it was like 80 degrees out but id thought it would be better than that with a stage 1 and only me drivin  Huh

Also can a boost leak cause timing to be pulled?

Sorry I'm just a newby
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)