Pages: [1]
Author Topic: ME7.1 immo off - lamp blinking  (Read 7358 times)
gregsback
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 50


« on: September 20, 2012, 08:53:16 AM »

Dear all,
I have changed 0x12 and 0x22 in M95040 and corrected Checksums.
Immo is off, but the lamp of immobilizer is blinking. fault code says "Adapt Key"
Does anybody know what might be the rootcause?
many thanks in advance!

Greg
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #1 on: September 20, 2012, 09:15:29 AM »

They keys arent adapted to the immo unit....
Logged
gregsback
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 50


« Reply #2 on: September 20, 2012, 09:22:51 AM »

do you know waht to chane in the M95040 to overcome this issue?
Logged
prj
Hero Member
*****

Karma: +1069/-476
Offline Offline

Posts: 6011


« Reply #3 on: September 21, 2012, 02:07:37 AM »

do you know waht to chane in the M95040 to overcome this issue?

Nothing. You already disabled the immo, so the car starts.
What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
slowguy
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« Reply #4 on: October 02, 2012, 03:38:26 AM »

Nothing. You already disabled the immo, so the car starts.
What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this.

I had the same issue with a previous ecu. Car would start but immo light kept blinking in dash. To adapt the keys to the cluster would you still need the 7 digit SKC to do this is VCDS?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #5 on: October 03, 2012, 04:29:09 AM »


Yes you still need the SKC. its only 4 digits though. And of course put the "0" in front of it.
Logged
slowguy
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39


« Reply #6 on: October 03, 2012, 04:57:10 AM »

My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #7 on: October 03, 2012, 05:07:13 AM »

its 4.
its always 4
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #8 on: October 04, 2012, 08:43:24 AM »

My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits?

Just open my me7 tuner wizzard (eeprom modder sheet). Load your ori eeprom and it will show you your SKC key
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)