Immo defeat 8D0 907 558T

Pages: [1]

« previous next »

Author

Topic: Immo defeat 8D0 907 558T (Read 7357 times)

DavidW

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Immo defeat 8D0 907 558T « on: February 07, 2013, 09:24:14 AM »

Hi guys,
I'm a newbie on here and hoping someone could help me out. I'd like to understand how to remove the immobilizer on this ecu. Which bytes do I need to change and to what?


« Last Edit: February 13, 2013, 12:07:07 PM by nyet »	Logged

316LV

Full Member

Karma: +12/-2
Offline

Offline

Posts: 150

	Re: Immo defeat 8D0 907 558T « Reply #1 on: February 07, 2013, 03:38:44 PM »

Let me preface by saying I've never modified a 95040 dump... Too easy to just flash one of the many immo off bins from the forum.

That said, the following post by SeRiLLo should answer your question:

http://nefariousmotorsports.com/forum/index.php?topic=1629.msg16090#msg16090

Good luck!


	Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.

DavidW

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: Immo defeat 8D0 907 558T « Reply #2 on: February 07, 2013, 04:36:28 PM »

Thank you for your reply,

As far as I can tell this is a M3.8.2 ecu and I desoldered the eeprom and read the dump as a 24c02, I already have what is supposed to be a immo off dump but not had chance to try it.

I was really hoping for a chance to learn more about what bytes do what and if they are the same bytes as those that are listed for ME7 ecus.

Thanks


« Last Edit: February 08, 2013, 07:01:59 AM by DavidW »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 03:40:17 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search