Pages: [1]
Author Topic: Memory layout VW Polo GTI 2008, 1.8T  (Read 4574 times)
WhiteGTI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: December 05, 2012, 11:56:58 AM »

Hi,

i want to read my ecu but i don't know the exact memory layout. Has anybody an idea ? I've tried one but reading from ecu fail's...
Is there a chance to brick the ecu while reading?!

sorry for these noob questions but im really new in all these thing Wink

Log:

Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP1281 session.
KWP1281 connect info: °6A906032TL 1.8l R4/5VT     G   0040
Read 5 ECU info entries:
   0x92, System Supplier ECU Hardware Number: 0261208950,
   0x94, System Supplier ECU Software Number: 1037378104,
   0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D,
   0xFF,
   0x9B, Calibration Date: 06A906032TL , 0040, 0x00002CEC, 0x00000001, 0x3435, 1.8l R4/5VT    ,  G   ,
   0x9C, Calibration Equiment Software Number: 0x80030900,

greetings from germany!
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #1 on: December 05, 2012, 12:05:38 PM »

29F800BB
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #2 on: December 05, 2012, 12:22:47 PM »

2008?

ME7?

KWP?
Logged
WhiteGTI
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #3 on: December 05, 2012, 12:36:00 PM »

yes me7.5 ... i am using vcds hex-can interface, is it possible to brick the ecu while reading from it?
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #4 on: December 07, 2012, 05:30:18 AM »

Its against the odds but not impossible.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)