M383 & M592 ECUs with CAN Interface inside

Pages: [1]

« previous next »

Author

Topic: M383 & M592 ECUs with CAN Interface inside (Read 4521 times)

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	M383 & M592 ECUs with CAN Interface inside « on: December 20, 2012, 11:01:35 AM »

Friends I have doubt about M383 and M592 ECUs of 1.8T engines. I have some of these ECUs and all of them have an AN82527 (Intel CAN Controller) IC inside. Also checking out the ECU's pinout, I found that pins 29 & 41 are refered as CAN Data Bus. Check out the pics in the attachment. Then my question is, could be posible that we can communicate with these ECUs using CAN protocol?


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: M383 & M592 ECUs with CAN Interface inside « Reply #1 on: December 20, 2012, 11:13:03 AM »

No. Any can-bus will be for communicating with other modules in the car. Communication with the ecu is done over the k-line.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	Re: M383 & M592 ECUs with CAN Interface inside « Reply #2 on: December 20, 2012, 01:49:06 PM »

Quote from: ddillenger on December 20, 2012, 11:13:03 AM

No. Any can-bus will be for communicating with other modules in the car. Communication with the ecu is done over the k-line.

Understood, but would be very useful to have CAN communication and capabilities with these ECUs.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 01:47:21 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search