Pages: [1]
Author Topic: HOW TO flash dq200, 250  (Read 5126 times)
JBL-GG
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: March 25, 2013, 03:47:55 PM »

Hey mates - nice evening to all of you,

so Ive got a question for the experts of you.

Is it possible to read/write DSG Ecu using my FGTech  2, MPPS or with any other chiptuning-tool except
Byteshooter?

Or do you guys have special flashing tools for it? maybe you can name some solutions for me...

thanks in advance,
kind regards
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: March 25, 2013, 06:31:21 PM »

x17! finally.  Roll Eyes
Logged
JBL-GG
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #2 on: March 25, 2013, 11:57:04 PM »

thanks, so you wean the MagPro will do the job Smiley
Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539


« Reply #3 on: March 27, 2013, 11:46:56 AM »

thanks, so you wean the MagPro will do the job Smiley

No the X17 tool
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: March 27, 2013, 02:12:18 PM »

x17! finally.  Roll Eyes

scratch that.  Roll Eyes

Quote
Identification ECU
Connecting...
Connected OK
HV: 02E927770AE C30 0001
IDENT:02E300042Q 0927BGSG DSG 070
IDENT: 00000506270211 TFK-03027.06.050450700085010211
Total number of attempts to write flash:2
Number of attempts successful flash storage:2
Flash status XX=0 BB=0
DSG type: C30
Finished OK
--
Read data
Read section: 00008100 - 00070000
Read addr 0000A000 / 00070000
..........
Read addr 0006E000 / 00070000
Checksum Error (ident OK)
Read 425728 bytes in 12 minutes and 47 seconds
Finished OK
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)