Pages: [1]
Author Topic: Smart CDI EDG15C5 xdf or other definition wanted  (Read 10526 times)
flyingbrike
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 5


« on: October 12, 2010, 02:56:26 PM »

I am new here
I have my BIN in TunerPro ( nice programming !)
I need definitions file
How to make it?
Download it somewhere?
ECU Hardware : 0281010161
ECU software 1037381401

Keep up the good work.!!!
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: October 23, 2010, 11:09:36 AM »

This is the closest I have.
http://www.nefariousmotorsports.com/forum/index.php?topic=250.0
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
spd_tolis
Newbie
*

Karma: +0/-7
Offline Offline

Posts: 13


« Reply #2 on: November 06, 2010, 04:13:55 AM »

I am new here
I have my BIN in TunerPro ( nice programming !)
I need definitions file
How to make it?
Download it somewhere?
ECU Hardware : 0281010161
ECU software 1037381401

Keep up the good work.!!!

DO YOU HAVE ORG FILES?Huh??
Logged
flyingbrike
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 5


« Reply #3 on: November 22, 2010, 01:39:40 PM »

yes , i posted it on the ori files section under
   Smart CDI EDG15C5
Logged
flyingbrike
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 5


« Reply #4 on: November 23, 2010, 03:20:52 PM »


I tried the file but the maps are not the same, must be different model, thanks anyway
Logged
spd_tolis
Newbie
*

Karma: +0/-7
Offline Offline

Posts: 13


« Reply #5 on: November 23, 2010, 11:49:05 PM »


I tried the file but the maps are not the same, must be different model, thanks anyway
I THINK..... inj part throttle is 06FAB6 16*16 and rail pressure is 07369E 16*16 and injection at part throttle ( Map 1 ) ( boost x Rpm ) is 07A24A 16*20 and injection at part throttle ( Map 2 ) ( boost x Rpm ) is 7A51A is 16*20 and turbo pressure is 06F770 12*12 and torque limiter is 06F8E6 19*1 and torque limiter #2 06FECC 19*1
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)