Pages: [1]
Author Topic: Map Switching in ME7.5 with 29F400  (Read 9977 times)
cocktailyogi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 42


« on: April 03, 2013, 05:01:49 AM »

Hello,

I am interested in different options for mapsitching of 2 maps. We are talking about a ME7.5 with 29F400-Flash. What kind of modifications are possible? Is it possile to trigger that switching with an external electrical signal?

Does the ECU have any unused I/Os ?

Kind regards,
Yogi

Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601


« Reply #1 on: April 03, 2013, 06:19:27 AM »

Prior to your "how is it done" question i would like to know:

Is there enough room for a second mapping on a 29F400?
Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6038


« Reply #2 on: April 03, 2013, 06:24:26 AM »

Is there enough room for a second mapping on a 29F400?

More than.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: April 03, 2013, 08:09:11 AM »

If you don't have cruise fitted you can use that. Take a cruise stalk, strip it down , wire it down and then use the switches to trigger your map switching .
Logged
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #4 on: April 03, 2013, 12:08:32 PM »

how to use cruise switch to change boost map (one stock , second with more boost) ? should we write some routine ? or what ?
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #5 on: April 03, 2013, 12:37:46 PM »

how to use cruise switch to change boost map (one stock , second with more boost) ? should we write some routine ? or what ?

Already one written and on here! It has kfzw and krte in it as well but that can be stripped out. It controls the boost via ldrxn so load based.
Logged
wreeve
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 23


« Reply #6 on: April 03, 2013, 01:11:00 PM »

Back in the old days with EPROMS you could use a double size EPROM and a switch on the high address pin! I presume you could do the same with the newer flash EEPROMS? Would mean the whole 512k could be swaps on the fly?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #7 on: April 03, 2013, 01:18:49 PM »

Back in the old days with EPROMS you could use a double size EPROM and a switch on the high address pin! I presume you could do the same with the newer flash EEPROMS? Would mean the whole 512k could be swaps on the fly?

i just made a thread about this today.
Logged
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #8 on: April 03, 2013, 02:48:25 PM »

Already one written and on here! It has kfzw and krte in it as well but that can be stripped out. It controls the boost via ldrxn so load based.

i found it.. after writting my post Smiley  it is written for 2.7bit , but probably would work with 1.8t i suppose ?

littco what about als/nls ? it is possible to switch off als/nls with this routine ? because i add to my file als/nls but in normal driving i don't use it , and would be nice to switch off this things Smiley
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #9 on: April 03, 2013, 08:01:52 PM »

Back in the old days with EPROMS you could use a double size EPROM and a switch on the high address pin! I presume you could do the same with the newer flash EEPROMS? Would mean the whole 512k could be swaps on the fly?

which pin are we talking here? a12? http://www.spansion.com/Support/Datasheets/AM29F400B_EOL_21505e8.pdf
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)