NefMoto > Technical > NefMoto Software > Bad Flash Memory?
Pages: [1]
« previous next »
Author Topic: Bad Flash Memory?  (Read 5605 times)
dstamatoiu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« on: August 25, 2013, 08:01:48 PM »
Hi, I been trying to figure out if my flash memory is bad.. I been having issue trying to connect using NefoMoto tool. I try to read the ecu and I get this:

Quote
Validated FTDI device is in dumb mode.
Disconnected
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP2000 session.
Connected
Disabling Windows sleep mode.
Reading ECU flash memory.
ECU reports programming session preconditions have been met.
Negotiating communication timings.
Successfully changed to new communication timings.
Requesting security access.
Security access granted.
Starting diagnostic session.
Disconnecting because no response was received for the Tester Present message.
Disconnected
Reading ECU flash memory failed.
100% complete.
Restoring Windows sleep mode.

This is the ecu info:

Quote
0x92, System Supplier ECU Hardware Number: 0261207939
   0x94, System Supplier ECU Software Number: 1037366446
   0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, , 0xFF
   0x9B, Calibration Date: 8E0909518AF , 0002, 0x03003E81, 0x00001300, 0x00D2, 1.8L R4/5VT    ,  G02
   0x9C, Calibration Equiment Software Number: 0x00000000
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #1 on: August 25, 2013, 08:14:49 PM »
Is it a stock ecu?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dstamatoiu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #2 on: August 25, 2013, 08:17:08 PM »
Quote from: nyet on August 25, 2013, 08:14:49 PM
Is it a stock ecu?

Yes, the only thing I did was turn off the immo.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: August 25, 2013, 08:21:20 PM »
I have had 0 luck getting nefmoto to read or write a 518AF, although I know others have. My errors have been the exact same as yours.

Bootmode write it with galletto, or use MPPS. Works every time.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
dstamatoiu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8
« Reply #4 on: August 25, 2013, 08:29:13 PM »
Quote from: ddillenger on August 25, 2013, 08:21:20 PM
I have had 0 luck getting nefmoto to read or write a 518AF, although I know others have. My errors have been the exact same as yours.

Bootmode write it with galletto, or use MPPS. Works every time.

Thank you again Ddillenger! My cable is on order. I will update when I get it. Time to wait.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 10:06:31 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.037 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)