Pages: [1]
Author Topic: MAF recalibration ( Blow thru setup)  (Read 3715 times)
itemonsale
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 59


« on: May 18, 2013, 06:24:11 AM »

I moved the MAF to the pressured side ( blow through setup), what parameter need to be change in the software to compensate the increase of temperature different?  Sorry if it has been posted before but I did search but no result come up.. Thank you in advance!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: May 18, 2013, 06:36:40 AM »

I moved the MAF to the pressured side ( blow through setup), what parameter need to be change in the software to compensate the increase of temperature different?  Sorry if it has been posted before but I did search but no result come up.. Thank you in advance!

http://nefariousmotorsports.com/forum/index.php?topic=983.30

Used google to search the site in the future.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
itemonsale
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 59


« Reply #2 on: May 18, 2013, 07:05:30 AM »

You save my life again ddillenger . .... MANY THANK YOU! sent you a pm
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)