Pages: [1]
Author Topic: changing me7 log into graph  (Read 7916 times)
adman
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« on: September 25, 2013, 12:06:27 AM »

I cant for the life of me get the me7 logger to dispplay graphs through ecuxplot. some help would be greatly apppreciated. when i try to import the csv it just sits there trying to load?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: September 25, 2013, 10:32:09 AM »

How larger are your csv's?

Large CSV+less powerful PC=no good.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
adman
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 19


« Reply #2 on: September 25, 2013, 07:01:51 PM »

i am pretty sure my 8 core cpu shouldnt struggle. after creating a log I thought it would be a simple import but no such luck?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: September 25, 2013, 07:09:26 PM »

You could post the log.

Or go through the things you have tried that are recommended in the ECUxPlot FAQ that didn't work.

Or provide any additional information that might help somebody actually figure out how to help you.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ratherb1
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 115



« Reply #4 on: September 26, 2013, 04:08:26 AM »

Turn the filter off ....see if that does anything
Logged

-ROMIE
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 18 queries. (Pretty URLs adds 0s, 0q)